• Voltage: 12V/24V
• Power: 50W
• Heating head size: 6 * 20mm
• Heating head material: 304 stainless steel
• Line length: 1M and 2M for option
• Line thick: 0.5 mm⊃2; (The cross section of the copper wire inside the heater is 0.5mm⊃2;
• Heating temperature: up to 350 degrees
The improvement compared to ordinary red heater
• From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
• From the original 40W power to 50W, therefore, the maximum temperature increases from 300-31℃ to 340-350℃ or so.
• The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
• Support the customization of different specifications, length, resistance of the heater.
• Can be used with the new HT-NTC100K temperature thermistor (Temperature measurement can be up to 350 degrees).
• The effective heating part of the heater must keep dry.
• The electrical connector of the single-ended heater should be placed out of the insulation layer and heating room, and the working voltage shall not exceed its rated value of 10%. The shell should be effectively grounded.
• Electric components working environment, the temperature should not be greater than 95 degrees, no explosive or corrosive gases.