Back
Previous product
Creality HALOT One (Resin) $259.95 Inc. GST
Next product
Phrozen Transform (Resin) $2,599.95 Inc. GST
Sold out

Phrozen Shuffle XL Lite (Resin)

$949.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.020365

Out of stock

Email when stock available

Add to wishlist
SKU: PshfflXLlt Categories: ,
Description
Phrozen’s Shuffle XL Lite prints at 75µm and speeds of 20mm per hour, producing large models up to 24cm in height. with a color LCD and a printing area of 8.9”, the Shuffle XL Lite provides users with stable printing via its twin linear rails as well as an easy-to-use interface.

Product Features: 

3dpsabullet 8.9” 2K LCD Screen High resolution with a large printing area

3dpsabullet ZERO wobblings during printing

3dpsabullet Works best with Phrozen’s resins, also compatible with most 3rd party resins

3dpsabullet Suitable for printing large 3D models, dental applications, and product prototypes

Additional information
Machine size

290(L) x 290(W) x 470(H) mm
Build Volume

190(L) x 120(W) x 200(H) mm
XY Resolution

75 µm
Z-axis Resolution

10 – 100 µm
Resolution/Display

2560*1600 pixels; 8.9″ 2K
LED Array

405nm Matrix
Printing speed

20mm/hour
Compatible software

Chitubox
Connectivity

USB Flash drive
Input Power

100-240 VAC – 50/60 HZ
Package Dimensions

350(L)× 350(W) × 550(H) mm
Weight

21.5kg
Package Contents

Phrozen 3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.
Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.
Technical FAQs

  • Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

     

    • Model not sticking to the platform

      - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
      - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
      - Incorrect Bed leveling

    • Layer Separation or splitting

      - Machine is not stable during printing
      - FEP Film in the VAT is not tight enough May cause leaks
      - Print platform or VAT is misaligned

    • What should I do if I have a failed print?

      - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks

    • How long should I wash the prints?

      - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model

    • How Can Light-off Delay Improve My 3D Prints?

      - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.

    • What Slicer Software Can I Use With My Phrozen LCD 3D Printer?

      - CHITUBOX, a third-party slicer software, is available for free and works with all Phrozen LCD 3D printers. Download here:Chitubox.