-10%

Anycubic Photon M3

$449.95 Inc. GST

Save: 10%

Approximate Cryptocurrency Prices:
· BTC: 0.013561

Recommended Uses: Jewelry, Miniature, and scale model.

In stock

Delivery: Estimated 24-48 hours to leave the warehouse, 4-7 business days in transit, and a possible 48-hour COVID-related courier delay
Shipping from Sydney Australia
SKU: A-PM3 Categories: ,
Description
The Anycubic Photon M3 impresses with its exceptionally large build volume and the high-resolution 7.6 inch monochrome display.

Product Features: 

3dpsabullet Ultra-high resolution of 4,096 x 2,560 pixels. It is capable of producing parts with high dimensional accuracy and intricate detailing.

3dpsabullet The new build plate has a texturized checkerboard pattern that dramatically improves adhesion and print success rate.

3dpsabullet The printing volume of Anycubic Photon M3 is up to 180×163.9×102.4mm.

3dpsabullet The fastest printing speed can reach 50mm/h, and it only takes 2.5 hours to print the 12cm high miniature, which is 30 minutes less than the 3 hours of the competitive products.

3dpsabullet With the Anycubic LighTurbo matrix light source system, the matrix LED beads will provide strong light energy, making high-speed printing possible.

3dpsabullet The anti-scratch protective film greatly extends the lifespan of the LCD screen.

3dpsabullet The printer adopts an LCD screen with 400:1 contrast, 100% higher than its competitor. The high contrast leads to parts with better surface finish.

3dpsabullet More convenient and intuitive to operate and make the parameter adjustment.

 

Additional information
Machine Size

269(L) x 256(W) x 425(H) mm

Build Volume

163(L) x 102W) x 180(H) mm

XY Resolution

32µm

Z-axis Resolution

10 ~ 100um

Resolution/Display

4,096 x 2,560 4K + Monochrome Screen

LED Array

UV integrated light(wavelength 405nm

Printing speed

50mm/h

Compatible software

Photon Slicer

Connectivity

USB Flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

350(L) x 350(W) x 500(H) mm

Weight

7kg

Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.

Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

 
  • Model not sticking to the platform

    - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
    - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
    - Incorrect Bed leveling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the VAT is not tight enough May cause leaks
    - Print platform or VAT is misaligned
  • What should I do if I have a failed print?

    - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?

    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
  • How Can Light-off Delay Improve My 3D Prints?

    - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
  • What Slicer Software Can I Use With My Anycubic LCD 3D Printer?

    - CHITUBOX, a third-party slicer software, is available for free and works with all Anycubic LCD 3D printers. Download here:Chitubox.