Back
Previous product
Anycubic Kobra 2 $314.95 Inc. GST

Save: 26.7%

-15%

Anycubic Photon Mono M5s

$659.95 Inc. GST

Save: 15.4%

Approximate Cryptocurrency Prices:
· BTC: 0.005881

In stock

Delivery: Estimated 24-48 hours to leave the warehouse, 4-7 business days in transit, and a possible 48-hour COVID-related courier delay
Shipping from Sydney Australia
SKU: A-PM5s Categories: ,
Description

Anycubic Photon Mono M5s has a 10.1 inch 12K monochrome LCD screen with a resolution of 11520*5120, achieving an X accuracy of 19 microns. It can print with exceptional detail, as fine as human hair. The contrast ratio is 480:1, making models have sharp edges and distinct contours.

Product Features: 

3dpsabulletAnycubic pioneered the consumer-grade leveling-free resin 3D printer. During printing, the mechanical sensor on the cantilever arm detects the fit between the printing platform and the floating leveling module and automatically adjusts it based on the detection results. This eliminates the risk of leveling failure and improves the printing success rate

3dpsabulletPhoton Mono M5s uses high-speed resin to achieve an average printing speed of 105mm/h*, and is equipped with a high-speed release film, which reduces the release force and increases the speed while ensuring a high printing success rate

3dpsabulletPrior to printing, auto device check and resin detection are utilized to check the exposure screen, mechanical detection module, and motor operation status and the amount of resin meets the needs to help start printing smoothly. In addition, printing status detection can report and analyze common bottoming-out printing failures, improving printing efficiency.

3dpsabulletThe new “Intelligent Mode” in Anycubic Photon Workshop 3.1 can match exposure parameters according to model details and dimensions. And the new support algorithm further improves the printing stability and success rate, realizing one-click repair of damaged models, and improving the speed of both punching and slicing.

Additional information
Machine Size

290(L) x 270(W) x 460(H) mm

Build Volume

123(L) x 218(W) x 200(H) mm

XY Resolution

24µm

Z-axis Resolution

10 ~ 100um

Resolution/Display

12K(11,520 x 5,120px) resolution

LED Array

UV integrated light(wavelength 405nm

Printing speed

60mm/h

Compatible software

Photon Slicer

Connectivity

USB Flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

400(L) x 400(W) x 500(H) mm

Weight

12kg

Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.

Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

 
  • Model not sticking to the platform

    - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
    - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
    - Incorrect Bed leveling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the VAT is not tight enough May cause leaks
    - Print platform or VAT is misaligned
  • What should I do if I have a failed print?

    - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?

    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
  • How Can Light-off Delay Improve My 3D Prints?

    - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
  • What Slicer Software Can I Use With My Anycubic LCD 3D Printer?

    - CHITUBOX, a third-party slicer software, is available for free and works with all Anycubic LCD 3D printers. Download here:Chitubox.