Name: Anycubic Photon Mono M5
SKU: A-PMM5
Price: 559.95 AUD
Availability: InStock

Description
Additional information
Technical FAQs

The 10.1 inch 12K monochrome LCD panel on the Anycubic Photon Mono M5 has a resolution of 11520*5120 and an X accuracy of 19 microns. It can print with extraordinary fineness, comparable to human hair. Models feature crisp shapes and sharp edges because to the 480:1 contrast ratio.

Product Features:

The build plate can be made more flat than sandblasting platforms by using the laser engraving process for the printing platform. This effectively increases the adhesion of the model, lowers the likelihood of it falling off and warping, and significantly raises the printing success rate.

Adopt a high-stability and precision dual linear rails lead screw Z axis, combined with a high-wear-resistant POM clearance nut, to ensure the precise operation of the Z-axis micron-level without shaking, effectively eliminating the layered grain and displaying the beauty of details.

The upgraded free self-developed slicer Anycubic Photon Workshop 3.1 brings you an even better slicing experience in punching, supporting, shelling and layout arranging.Simplified UI makes slicing easier.

The new support algorithm further improve the printing stability and success rate, reduce the damage on the model surface, and the support and bottom valve are easier to remove. Realize one-click repair of damaged models, comprehensively improve the speed of punching and slicing, and make slicing easier to use.

Additional information

Machine Size	290(L) x 270(W) x 460(H) mm
Build Volume	123(L) x 218(W) x 200(H) mm
XY Resolution	24µm
Z-axis Resolution	10 ~ 100um
Resolution/Display	12K(11,520 x 5,120px) resolution
LED Array	UV integrated light（wavelength 405nm
Printing speed	60mm/h
Compatible software	Photon Slicer
Connectivity	USB Flash drive
Input Power	100-240 VAC – 50/60 HZ
Package Dimensions	400(L) x 400(W) x 500(H) mm
Weight	12kg
Package Contents	3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.
Warranty	12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

Model not sticking to the platform
- Insufficient exposure time, increasing the exposure time should help the resin adhere properly
- Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
- Incorrect Bed leveling
Layer Separation or splitting
- Machine is not stable during printing
- FEP Film in the VAT is not tight enough May cause leaks
- Print platform or VAT is misaligned
What should I do if I have a failed print?
- Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
How long should I wash the prints?
- It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
How Can Light-off Delay Improve My 3D Prints?
- Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
What Slicer Software Can I Use With My Anycubic LCD 3D Printer?
- CHITUBOX, a third-party slicer software, is available for free and works with all Anycubic LCD 3D printers. Download here:Chitubox.

Sign in

Anycubic Photon Mono M5

The 10.1 inch 12K monochrome LCD panel on the Anycubic Photon Mono M5 has a resolution of 11520*5120 and an X accuracy of 19 microns. It can print with extraordinary fineness, comparable to human hair. Models feature crisp shapes and sharp edges because to the 480:1 contrast ratio.

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

Model not sticking to the platform

- Insufficient exposure time, increasing the exposure time should help the resin adhere properly

- Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area

- Incorrect Bed leveling

Layer Separation or splitting

- Machine is not stable during printing

- FEP Film in the VAT is not tight enough May cause leaks

- Print platform or VAT is misaligned

What should I do if I have a failed print?

- Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks

How long should I wash the prints?

- It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model

How Can Light-off Delay Improve My 3D Prints?

- Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.

What Slicer Software Can I Use With My Anycubic LCD 3D Printer?

- CHITUBOX, a third-party slicer software, is available for free and works with all Anycubic LCD 3D printers. Download here:Chitubox.

Related products