Sold outNew

Anycubic Photon Mono M7 Pro

$949.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.010027

Out of stock

Email when stock available

SKU: A-PMM7Pro Categories: ,
Anycubic’s Photon Mono M7 Pro ushers in a new era of 3D printing. Thanks to a complex combination of advanced machine intelligence and fine-tuned processes, the resin printer is with you with pinpoint accuracy and excellent speed throughout the printing process.

Product Features:

3dpsabullet130mm/h for Even Standard Resins. 170mm/h with High-speed Resin, 0.1mm Layer

3dpsabullet10.1”, 14K (13320 * 5120) High-Precision Optical System

3dpsabulletAuto-Adaptive Technology Control Heating

3dpsabulletAuto Resin Refill, Withdrawal

3dpsabulletIntelligent Workflow-Assist Printing

Additional information
Machine size

312L) x 315(W) x 520(H) mm

Build Volume

126(L) x 223W) x 230(H) mm

XY Resolution


Z-axis Resolution

10 ~ 100um


14K(13,312 x 5,120px) resolution

LED Array

UV integrated light(wavelength 405nm

Printing speed


Compatible software

Photon Slicer


USB Flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

400(L) x 400(W) x 500(H) mm



Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.


12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
    - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
    - Incorrect Bed leveling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the VAT is not tight enough May cause leaks
    - Print platform or VAT is misaligned
  • What should I do if I have a failed print?

    - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?

    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
  • How Can Light-off Delay Improve My 3D Prints?

    - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
  • What Slicer Software Can I Use With My Anycubic LCD 3D Printer?

    - CHITUBOX, a third-party slicer software, is available for free and works with all Anycubic LCD 3D printers. Download here:Chitubox.