Anycubic Photon Mono SE (Resin)

$529.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.008917

or 4 fortnightly payments of $132.49 with Afterpay More info

Buy 3D Printers and Supplies in Australia with Afterpay, Zip Pay, Bitcoin Payments and More.

In stock

Delivery: Estimated 48 hours to leave warehouse, 4-7 Business Days in Transit, Possible 48 hour COVID-19 courier delay
Shipping from Sydney/Melbourne
SKU: apmonose Categories: , ,

The Anycubic Photon Mono SE achieves fast printing, each layer of exposure can cure the resin in only 1 second, and the printing speed is MAX 80mm/h, which is 4 times that of ordinary colour screens, which greatly improves the printing efficiency and saves time printing More models. The 6.08-inch 2K monochrome LCD has a longer service life and can print for more than 2000 hours.

 Anycubic Photon Mono SE Resin 3D Printer

3dpsabullet 6″ 2K Monochrome LCD

3dpsabullet Easy Bed levelling

3dpsabullet Fast Printing Speed (Monochrome Screen)

3dpsabullet Anycubic APP Remote Control

3dpsabullet New Matrix Parallel Light Source

3dpsabulletUV Cooling System


Additional information



21.9 x 12.2 x 11.5 inches

Printing Technology

LCD Shadow Masking

Build Volume

130mm(L) x 78mm(W) x 160mm(H)


2560*1620(2K); 3.5 inch Touch Screen

Positioning Precision

XY Res.: 0.051mm, Z: 0.01mm

Layer resolution

25 ~ 100um


UV integrated light(wavelength 405nm)

Machine Size

220mm(L) x 200mm(W) x 400mm(H)

Compatible software

Photon Slicer, Chitubox, Prusa Slicer, Lychee Slicer



Rated Power



Twelve (12) months Warranty for defective parts against manufacturing

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Bottom exposure time is insufficient, increase the exposure time to help the resin adhere properly
    - Contact area between the model and platform is small, it is highly suggested to add a raft to increase the surface area
    - Bad Bed levelling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the vat is not tight enough (May cause leaks
    - Print platform or vat is not tightened or it is misaligned
  • What do I do if I had a failed print?

    - Drain and filter out the resin from the VAT to remove any excess hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?
    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model