Back
Previous product
Capricorn Teflon Tube $12.95 – $14.95 Inc. GST
Next product
Volcano Silicone Sock $6.95 Inc. GST
-6%

Anycubic Photon Mono X 6K (Resin)

$849.95 Inc. GST

Save: 5.6%

Approximate Cryptocurrency Prices:
· BTC: 0.025617

Recommended Uses: Jewelry, Miniature, Engineering prototype, Architecture, and Mass production.

In stock

Delivery: Estimated 24-48 hours to leave the warehouse, 4-7 business days in transit, and a possible 48-hour COVID-related courier delay
Shipping from Sydney Australia
Add to wishlist
SKU: A-PMN6k Categories: ,
Description
Anycubic Photon Mono X 6K can print up to 9.6 x 7.8 x 4.8 in. / 24.5 x 19.7 x 12.2 cm (HWD) at a time, similar dimensions to a super midi rugby ball. 199.1 oz. / 1.6 gal. / 5.9 L total build volume leaves more space and freedom for you to make any shapes of cubic.

Product Features:

3dpsabullet Exposure screen: 9.25’’ monochrome
3dpsabullet Printing volume: 199.1 oz. / 1.6 gal. / 5.9 L
3dpsabullet Light transmittance: 6%
3dpsabullet Contrast ratio: 350:1
3dpsabullet Light source: Parallel matrix (LED x 40)
3dpsabullet Power density: 5,000 – 6,500 μw/cm² / 34,150 – 44,395 lux
3dpsabullet Printing accuracy: 5,760 x 3,600 px (6K)
3dpsabullet Horizontal resolution: 34 μm
3dpsabullet Printing speed: Max 60mm/h
3dpsabullet Control panel: 3.5’’ TFT touch-control
3dpsabullet Data input: USB-A 2.0 / LAN

Additional information
Machine Size

270(L) x 290(W) x 475(H) mm
Build Volume

197(L) x 122(W) x 245(H) mm
XY Resolution

34 μm
Z-axis Resolution

25 ~ 150um
Resolution/Display

9.25’’ monochrome
LED Array

UV integrated light（wavelength 405nm）
Printing speed

60mm/h
Compatible software

Photon Slicer, Chitubox, Prusa Slicer, Lychee Slicer
Connectivity

USB Flash drive;
Input Power

100-240 VAC – 50/60 HZ
Package Dimensions

620(L) x 400(W) x 420(H) mm
Weight

16g
Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.
Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.
Technical FAQs

  • Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

     

    • Model not sticking to the platform

      - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
      - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
      - Incorrect Bed leveling

    • Layer Separation or splitting

      - Machine is not stable during printing
      - FEP Film in the VAT is not tight enough May cause leaks
      - Print platform or VAT is misaligned

    • What should I do if I have a failed print?

      - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks

    • How long should I wash the prints?

      - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model

    • How Can Light-off Delay Improve My 3D Prints?

      - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.

    • What Slicer Software Can I Use With My Anycubic LCD 3D Printer?

      - CHITUBOX, a third-party slicer software, is available for free and works with all Anycubic LCD 3D printers. Download here:Chitubox.