Anycubic Photon Mono X 6Ks

$449.95 Inc. GST

Save: 1.1%

Approximate Cryptocurrency Prices:
· BTC: 0.004135

In stock

Delivery: Estimated 24-48 hours to leave the warehouse, 4-7 business days in transit, and a possible 48-hour COVID-related courier delay
Shipping from Sydney Australia
SKU: A-PMX6Ks Categories: ,
ANYCUBIC Photon Mono X 6Ks resin printer uses a 9.1” 6K mono screen with a HD resolution of 5760*3600 and a high contrast ratio of 380:1, bringing sharper and delicate details. Comes with a high light transmittance anti-scratch film protector, effectively protecting the screen from wearing and scratches while ensuring printing accuracy. One free extra piece is included for easy replacement.

Product Features: 

3dpsabullet The printing size of ANYCUBIC Photon Mono X 6Ks resin 3d printer is 195.84X122.4X200mm, so you can print small models in one batch to improve the printing efficiency. And the max printing volume is up to 4.76L, making it even more convenient for printing large-sized model

3dpsabullet The upgraded Anycubic LighTurbo matrix light source and high-precision textured optical lens provide a stable and even parallel light source, effectively removing optical layers and grid lines to create a smooth and delicate model surface. The max printing speed reaches 60 mm/h, completing your 3d printing models even sooner.

3dpsabullet Photon Mono X 6Ks 3d resin printer adopts a dual-linear Z-axis rail and highly wear-resistant POM anti-backlash nuts, restraining the Z-axis’ stability to the micron level, effectively eliminating printing layers and ensuring printing details. The laser-engraved platform has better adhesion than sandblasting ones, significantly reducing fall-offs and warping-ups, and bringing you an even better success rate.

3dpsabullet Anycubic Photon Workshop 3.0 brings you an even better slicing experience in punching, supporting, shelling, and layout arranging. A simplified UI interface makes slicing easier. The new model repairing function also helps boost the printing success rate. Free to use permanently.


Additional information
Machine Size

260(L) x 290(W) x 417(H) mm

Build Volume

195(L) x 122(W) x 200(H) mm

XY Resolution


Z-axis Resolution

25 ~ 150um


6K (5,760 x 3,600 pixels) resolution

LED Array

Upgraded Anycubic LighTurbo
Matrix light source(wavelength 405nm)

Printing speed


Compatible software

Photon Slicer


USB Flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

610(L) x 389(W) x 400(H) mm



Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.


12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
    - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
    - Incorrect Bed leveling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the VAT is not tight enough May cause leaks
    - Print platform or VAT is misaligned
  • What should I do if I have a failed print?

    - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?

    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
  • How Can Light-off Delay Improve My 3D Prints?

    - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
  • What Slicer Software Can I Use With My Anycubic LCD 3D Printer?

    - CHITUBOX, a third-party slicer software, is available for free and works with all Anycubic LCD 3D printers. Download here:Chitubox.