Sold out

Artillery Genius Pro (FDM)

$559.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.016652

Out of stock

Email when stock available

SKU: AR-GnsPro Categories: ,
The Artillery Genius is said to do; a direct drive system is indispensable. In some ways, a direct drive extrusion system can be superior to a Bowden mechanism, especially if you handle flexible or intricate filaments, such as TPU.

Product Features:

3dpsabullet Titan Direct Drive with Volcano Hot End

3dpsabullet Rapid AC Heat Bed

3dpsabullet Synchronized Dual Z-axis

3dpsabullet Auto Bed Leveling

3dpsabullet Quiet Stepper Driver

3dpsabullet High-Speed Printing

3dpsabullet Carborundum glass platform

3dpsabullet Clean Cable Management

3dpsabullet 32 bit motherboard

3dpsabulletUSB Drive Slot Layer Resolution

Additional information
Machine Size

430(L) x 390(W) x 590(H) mm

Build Size

220(L) x 220(W) x 250(H) mm

Printing Technology

Fused Deposition Modelling (FDM)

Max extruder temperature


Heating Plate


Supported Material

PLA, PETG, TPU, *ABS, Wood PLA, *ABS needs to be printed with at least 100C bed temperature and with an enclosure

Print Precision

X/Y 0.0125mm Z 0.05mm

Layer Resolution

0.08~0.32 mm

Nozzle Diameter





USB Flash drive

Supported Operating System


Compatible software

Simplify 3D, Ultimaker Cura, Prusa Slicer, Slic3r, Ideamaker

Supported File Format


Input Power

240 VAC – 50/60 HZ



Package Dimension

528(L) x 428(W) x 310(H) mm


Twelve (12) months Warranty for defective parts against manufacturing.Excluded from the warranty are consumable parts such as nozzles, PTFE tube, bed plate

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Motor Shaking/ Motor making abnormal grinding sounds

    - The home endstops are not getting triggered - make sure that there is object in between the endstops - Motor Cable not connected Properly - re-plug the cables back in and try again
  • File not detected / Memory Card Failure

    - The printer can only read .GCODE files, please slice the models first - Wrong file system format (It should be FAT32) - Corrupted SD card
  • No Filament being Extruded / Extruder motor making a knocking sound

    - Nozzle temp has not set to match the filament's recommended settings (Please run a temperature tower) - Tangled Filament Spool - Not enough cooling for the hotend (Heat Creep) - Nozzle Clog
  • Filament Leaking

    - Nozzle is not sitting flush against the heat break (throat) - PTFE Tube not sitting flush against the nozzle
  • Prints not sticking to the bed

    - Printer not leveled (Poorly Leveled) - Printing too fast (Recommended 20-40mm/s initial layer speed) - Insufficient Bed temperature
  • Warping / Curling of the printed object

    - Insufficient Bed temperature - Not enough contact area between the model and the heated bed
  • Layer shifting

    - Belts not tightened properly - Printing too fast
  • Print stopped halfway

    - Min/Max error: Check thermistor cables - Corrupted GCODE - Bad SD card