Sold out

Creality CR-10S PRO V2 Semi-DIY FDM 3D Printer

$784.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.009899

or 4 fortnightly payments of $196.24 with Afterpay More info

Buy 3D Printers and Supplies in Australia with Afterpay, Zip Pay, Bitcoin Payments and More.

CREALITY CR-10S PRO V2 Semi-DIY FDM 3D Printer Supplier Australia Official CR-10S PRO comes with 300mm x 300mm x 400mm (L x W x H) build size made by Creality 3D.  Upgraded CR-10S Pro has new functions and parts such as imported Capricorn Teflon PTFE tube, Meanwell power supply, motherboard, touch screen, Bondtech dual gear extrusion mechanism, resume printing and filament detector.

Out of stock


Product Features: Creality CR-10S PRO V2 Semi-DIY FDM 3D Printer Supplier Australia

3dpsabullet  Upgraded Creality CR-10s Pro

3dpsabullet  Dense Matrix automatic leveling: Upgraded Auto Leveling function, upgraded BL-touch.

3dpsabullet  Capricorn high temperature resistant PTFE teflon bowden tube.

3dpsabullet  High quality upgraded parts: Bondtech dual gear extrusion

3dpsabullet  Independently developed V2.4.1 motherboard-upgraded by Crealilty3D 4-layer PCB, TMC ultra-quiet drive 256 subdivision. Print more accurately

3dpsabullet  Upgraded Meanwell Wide Range 480W Power Supply wit adaptive automatic voltage regulation

3dpsabullet  Digital HD touch screen. Almost the same resolution as high-end mobile phones. Use operations more clearly visible.

3dpsabullet  Quick Installation

Additional information
Weight 17.5 kg
Dimensions 66 × 55 × 38 cm
Compatible software

Simplify 3D, Ultimaker Cura, Prusa Slicer, Slic3r, Ideamaker

Supported File Format


Supported Materials


Printing Technology

FDM (Fused Deposition Modeling)

Printing size

300mm x 300mm x 400mm (L x W x H)


12 Months (for major parts)

Technical FAQs
  •  Motor Shaking/ Motor making abnormal grinding sounds

    - The home endstops are not getting triggered - make sure that there is object in between the endstops
    - Motor Cable not connected Properly - re-plug the cables back in and try again
  • File not detected / Memory Card Failure

    - The printer can only read .GCODE files, please slice the models first
    - Wrong file system format (It should be FAT32)
    - Corrupted SD card
  • No Filament being Extruded / Extruder motor making a knocking sound

    - Nozzle temp has not set to match the filament's recommended settings (Please run a temperature tower)
    - Tangled Filament Spool
    - Not enough cooling for the hotend (Heat Creep)
    - Nozzle Clog
  • Filament Leaking

    - Nozzle is not sitting flush against the heat break (throat)
    - PTFE Tube not sitting flush against the nozzle
  • Prints not sticking to the bed

    - Printer not levelled (Poorly Leveled)
    - Printing too fast (Recommended 20-40mm/s initial layer speed)
    - Insufficient Bed temperature
  • Warping / Curling of the printed object

    - Insufficient Bed temperature
    - Not enough contact area between the model and the heated bed
  • Layer shifting

    - Belts not tightened properly
    - Printing too fast
  • Print stopped halfway

    - Min/Max error: Check thermistor cables
    - Corrupted GCODE
    - Bad SD card