Back
Previous product
Anycubic Photon Mono X2 $349.95 Inc. GST

Save: 9.1%

Next product
Anycubic Resin Vat $44.95$129.95 Inc. GST
Sold out

Elegoo Mars 3 Pro 4K

$329.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.003033

Out of stock

Email when stock available

SKU: E-M3Pro Categories: ,
Description
ELEGOO Mars 3 Pro comes with a 6.6 inches 4K mono LCD screen with a resolution of 4098*2560 and an XY resolution of 35μm, providing prints with fine details and high precision, which far surpasses FDM printers in quality and speed.
In addition, there is replaceable scratch-resistant tempered glass above the LCD screen with a perfect fit for better light transmission and protection.

Product Features:

3dpsabullet 6.6-inch 4K monochrome LCD screen with a replaceable anti-scratch tempered glass with 9H hardness for a better light transmittance at 4098 x 2560 high resolution, protecting the screen while restoring model details to the greatest extent.

3dpsabullet upgraded free-form surface COB lens consists of 36 highly integrated UV LED lights, paired with Fresnel lens to deliver an even beam of 405nm wavelength with 92% light uniformity for a more smooth surface finish and incredible printing quality.

3dpsabullet Large build volume of 143.43×89.6×175mm (5.647×3.52×6.8 inches), you can print one large model or undergo batch printing in a single job, which saves your time and greatly improves your productivity.

3dpsabullet Non-slip hexagon socket leveling screws work with the sandblasted oxide surface build plate for stronger adhesion and more stable printing. PFA release liner with less release tension for a higher printing success rate.

3dpsabullet The air purifier with a built-in active carbon filter to effectively absorb and filter the resin odor and pungent fumes, giving you a fresh printing experience. Copper heat tubes and a powerful cooling fan with faster heat transfer and better cooling efficiency, extend the life span of a 3D printer.

Additional information
Machine Size

227(L) x 227W) x 438.5(H) mm

Build Volume

143.43(L) x 89.6(W) x 175(H) mm

XY-axis precision

35 µm

Z-axis Resolution

12.5 – 50 µm

Resolution/Display

4098*2560px

LED Array

36 highly integrated LED lights with a newly designed free-form surface lens

Printing speed

30-50mm/h

Compatible software

Chitubox

Connectivity

USB Flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

567(L) x 285(W) x 285(H) mm

Weight

5.5 kg

Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED. NO FLASHDRIVE INCLUDED

Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, and ParaLED. Opening the machine without authorization voids the warranty.
6-months Limited Part Warranty for Print LCD

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Bottom exposure time is insufficient, increase the exposure time to help the resin adhere properly
    - Contact area between the model and platform is small, it is highly suggested to add a raft to increase the surface area
    - Bad Bed levelling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the vat is not tight enough (May cause leaks
    - Print platform or vat is not tightened or it is misaligned
  • What do I do if I had a failed print?

    - Drain and filter out the resin from the VAT to remove any excess hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?
    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model