Back
Previous product
Elegoo Mars 4 Max 6K $459.95 Inc. GST
Next product
Elegoo Neptune 4 Max $879.95 Inc. GST

Elegoo Mars 4 DLP

$579.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.008242

In stock

Delivery: Estimated 24-48 hours to leave the warehouse, 4-7 business days in transit, and a possible 48-hour COVID-related courier delay
Shipping from Melbourne Australia
SKU: E-M4DLP Categories: ,
Description
Elegoo Mars 4 DLP with up to 95% light uniformity, the ELEGOO MARS 4 DLP 3D printer uses Texas Instruments’ DLP technology to direct and concentrate a 405nm beam onto the resin tank’s bottom. With up to 95% more light transmission than conventional LCD displays, tempered glass can effectively reduce stray light interference and diffusion. The model surface becomes smoother and more delicate while the jagged edges are significantly reduced by the full-gray anti-aliasing technique.

Product Features:

3dpsabulletLow Power & Ultra-quiet Printing

3dpsabulletZ-axis linear rail is thickened from 15mm to 20mm

3dpsabulletSmart Voxeldance Tango Slicer

3dpsabulletPurified Printing Environment

 

 

Additional information
Machine Size

246(L) x 230(W) x 453(H) mm

Build Volume

132.8(L) x 74.7(W) x150(H) mm

XY-axis precision

52 µm

Z-axis Resolution

30 – 50 µm

Resolution/Display

2560*1440 voxels

LED Array

UV Integrated Light (wavelength 405nm)

Printing speed

30-50mm/h

Compatible software

Chitubox

Connectivity

USB Flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

567(L) x 285(W) x 285(H) mm

Weight

7.5 kg

Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED. NO FLASHDRIVE INCLUDED

Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, and ParaLED. Opening the machine without authorization voids the warranty.
3-months Limited Part Warranty for Print LCD

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Bottom exposure time is insufficient, increase the exposure time to help the resin adhere properly
    - Contact area between the model and platform is small, it is highly suggested to add a raft to increase the surface area
    - Bad Bed levelling

  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the vat is not tight enough (May cause leaks
    - Print platform or vat is not tightened or it is misaligned

  • What do I do if I had a failed print?

    - Drain and filter out the resin from the VAT to remove any excess hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?
    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model