Back
Next product
Elegoo Mars 4 DLP $549.95 Inc. GST

Save: 5.2%

-2%Sold out

Elegoo Mars 4 Max 6K

$449.95 Inc. GST

Save: 2.2%

Approximate Cryptocurrency Prices:
· BTC: 0.004009

Out of stock

Email when stock available

SKU: E-M4Max6K Categories: ,
Description
ELEGOO MARS 4 Max MSLA 3D Printer, UV Resin Photocuring Printer with 9.1-inch 6K Monochrome LCD, Double Cooling Fans, Multiple Print Modes, Printing Size of 195.84×122.4x150mm / 7.71×4.81×5.9 Inches

Product Features:

3dpsabullet9.1-inch 6K Mono LCD

3dpsabulletCOB+ Refractive Light Source

3dpsabulletLarge Build Volume

3dpsabulletVoxeldance Tango Software

3dpsabulletRefreshing Printing Environment

 

Additional information
Machine Size

246(L) x 230(W) x 453(H) mm

Build Volume

195.84(L) x 122.4(W) x150(H) mm

XY-axis precision

34 µm

Z-axis Resolution

30 – 50 µm

Resolution/Display

5760*3600 voxels

LED Array

UV Integrated Light (wavelength 405nm)

Printing speed

30-50mm/h

Compatible software

Chitubox

Connectivity

USB Flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

567(L) x 285(W) x 285(H) mm

Weight

7.5 kg

Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED. NO FLASHDRIVE INCLUDED

Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, and ParaLED. Opening the machine without authorization voids the warranty.
3-months Limited Part Warranty for Print LCD

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Bottom exposure time is insufficient, increase the exposure time to help the resin adhere properly
    - Contact area between the model and platform is small, it is highly suggested to add a raft to increase the surface area
    - Bad Bed levelling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the vat is not tight enough (May cause leaks
    - Print platform or vat is not tightened or it is misaligned
  • What do I do if I had a failed print?

    - Drain and filter out the resin from the VAT to remove any excess hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?
    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model