Previous product
Elegoo Mars 4 DLP $549.95 Inc. GST

Save: 5.2%

-2%Sold out

Elegoo Neptune 4 Max

$829.95 Inc. GST

Save: 2.4%

Approximate Cryptocurrency Prices:
· BTC: 0.008760

Out of stock

Email when stock available

SKU: E-N4Max Categories: ,
Elegoo Neptune 4 Max is equipped with the robust Klipper software, which allows for remarkable accelerations of up to 8000mm/s2 and printing rates of up to 500mm/s (by default, 250mm/s). It also supports sophisticated features like input shaping and pressure advancement. has X and Y axis acceleration sensors installed for automated calibration and better print quality.

Product Features:

3dpsabulletPrint volume: 420*420*480mm

3dpsabulletMax printing speed: 500 mm/s

3dpsabullet11×11 (121) points auto leveling

3dpsabulletUp to 300°C nozzle

3dpsabulletWIFI/WLAN/USB transfer




Additional information
Machine size

658(L) x 632(W) x 740(H) mm

Build Volume

420(L) x 420(W) x 480(H) mm

Printing Technology

FDM (Fused Deposition Modeling)

Max extruder temperature


Heating Plate


Supported Material

PLA, PETG, TPU, *ABS, Wood PLA, *ABS needs to be printed with at least 100C bed temperature and with an enclosure

Print Precision

X/Y 0.0125mm Z 0.05mm

Layer Resolution

0.08~0.32 mm

Nozzle Diameter





Micro SD card

Supported Operating System


Compatible software

Simplify 3D, Ultimaker Cura, Prusa Slicer

Supported File Format


Input voltage

240 VAC – 50/60 HZ

Package Dimension

800(L) x 700(W) x 800(H) mm




Twelve (12) months Warranty for defective parts against manufacturing.Excluded from the warranty are consumable parts such as nozzles, PTFE tube, bed plate

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Motor Shaking/ Motor making abnormal grinding sounds

    - The home endstops are not getting triggered - make sure that there is object in between the endstops - Motor Cable not connected Properly - re-plug the cables back in and try again
  • File not detected / Memory Card Failure

    - The printer can only read .GCODE files, please slice the models first - Wrong file system format (It should be FAT32) - Corrupted SD card
  • No Filament being Extruded / Extruder motor making a knocking sound

    - Nozzle temp has not set to match the filament's recommended settings (Please run a temperature tower) - Tangled Filament Spool - Not enough cooling for the hotend (Heat Creep) - Nozzle Clog
  • Filament Leaking

    - Nozzle is not sitting flush against the heat break (throat) - PTFE Tube not sitting flush against the nozzle
  • Prints not sticking to the bed

    - Printer not leveled (Poorly Leveled) - Printing too fast (Recommended 20-40mm/s initial layer speed) - Insufficient Bed temperature
  • Warping / Curling of the printed object

    - Insufficient Bed temperature - Not enough contact area between the model and the heated bed
  • Layer shifting

    - Belts not tightened properly - Printing too fast
  • Print stopped halfway

    - Min/Max error: Check thermistor cables - Corrupted GCODE - Bad SD card