Flashforge Foto 13.3

$3,299.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.102548

Recommended Uses: Miniature, Engineering prototype, Architectural model, and Mass production.

In stock

Delivery: Estimated 24-48 hours to leave the warehouse, 4-7 business days in transit, and a possible 48-hour COVID-related courier delay
Shipping from Sydney Australia
SKU: FF-Ft13.3 Categories: , ,
Foto 13.3 adopts the HD optical system that ensures high precision of models. For prototype designers and geeks, no wasting time on model polishing anymore. For 3D printing service providers and factory manufacturers that produce model products like jewelry models and parts, Foto 13.3 helps a lot with quick and precise printing.

Product Features:

3dpsabullet 4 times larger than that of other normal resin printers.

3dpsabullet 13.3-inch LCD 4K monochrome screen allows light transmits efficiently so as to remarkably shorten the print time for molding and exposure.

3dpsabullet The number of models set on the build plate could double that of other large-size SLA printers, hence shortening printing time by half.

3dpsabullet A high-efficiency cooling system improves print quality and elongates the service life of the LCD screen.

3dpsabullet The screen is set as a whole modular, which could be replaced as a whole.

3dpsabullet The industrial-grade dual linear ball screw ensures stable and accurate movement of the motor on the Z-axis, eliminating print layers.

Additional information
Machine Size

380(L) x 380(W) x 685(H) mm

Build Volume

292(L) x 165(W) x 400(H) mm

XY Resolution

76 µm

Z-axis Resolution

50 – 150 µm


3.5-inch colorful IPS touch screen 4K print LCD

LED Array

405nm LED

Printing speed

10-30 mm/h

File Input


Compatible software



USB thumb drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

496(L) x 496(W) x 786(H) mm



Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.


12 Months (for major parts) Excluded from the warranty are consumable parts such as the Print LCD, Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Bottom exposure time is insufficient, increase the exposure time to help the resin adhere properly
    - Contact area between the model and platform is small, it is highly suggested to add a raft to increase the surface area
    - Bad Bed levelling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the vat is not tight enough (May cause leaks
    - Print platform or vat is not tightened or it is misaligned
  • What do I do if I had a failed print?

    - Drain and filter out the resin from the VAT to remove any excess hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?
    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model