Back
Previous product
Flashforge Foto 8.9 $799.95 Inc. GST
Next product
Flashforge Foto 13.3 $3,299.95 Inc. GST

Flashforge Foto 6.0 (Resin)

$479.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.010289

In stock

Delivery: Estimated 24-48 hours to leave the warehouse, 4-7 business days in transit, and a possible 48-hour COVID-related courier delay
Shipping from MELBOURNE AUSTRALIA
Add to wishlist
SKU: FF-Ft6.0 Categories: ,
Description
Higher efficiency and better print effect are maintained by a uniform light exposure which is significantly improved from the previous generation. The printing speed is 30mm/h, which is two times faster than the color LCD.

Product Features:

3dpsabullet Larger Build Volume

3dpsabullet Fast and High-precision

3dpsabullet More Stable Framework

3dpsabullet Better Print Experience

Additional information
Machine Size

230(L) x 200(W) x 410(H) mm
Build Volume

130(L) x 82(W) x 155(H) mm
XY Resolution

50 µm
Z-axis Resolution

50 – 100 µm
Resolution/Display

3.5-inch colorful IPS touch screen 2560*1620 pixels
LED Array

405nm LED
Printing speed

10-30 mm/h
File Input

STL
Compatible software

FlashDLPrint
Connectivity

USB thumb drive
Input Power

100-240 VAC – 50/60 HZ
Package Dimensions

310(L) x 280(W) x 560(H) mm
Weight

9kg
Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.
Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Print LCD, Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.
Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

 

  • Model not sticking to the platform

    - Bottom exposure time is insufficient, increase the exposure time to help the resin adhere properly
    - Contact area between the model and platform is small, it is highly suggested to add a raft to increase the surface area
    - Bad Bed levelling

  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the vat is not tight enough (May cause leaks
    - Print platform or vat is not tightened or it is misaligned

  • What do I do if I had a failed print?

    - Drain and filter out the resin from the VAT to remove any excess hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?
    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model