Back
Previous product
Creality UW-02 Washing/Curing Machine $242.96 Inc. GST
Next product
Flashforge Foto 6.0 (Resin) $299.95 Inc. GST

Save: 9.1%
-9%

Flashforge Foto 8.9

$819.95 Inc. GST

Save: 8.9%

Approximate Cryptocurrency Prices:
· BTC: 0.008864

In stock

Delivery: Delivery: Estimated 48 hours to leave warehouse, 4-7 Business Days in Transit, Possible 48 hour COVID-19 courier delay
Shipping from MELBOURNE AUSTRALIA
Add to Wishlist
Add to wishlist
Compare
Categories: ,
Description
The upgraded Monoscreen allows greater air permeability, which eventually speeds up 3d printing. Take Voxelab standard resin, for example, Foto8.9 prints at 17-25mm/h with 0.05mm layer thickness. Prints many 3d objects at one go!

Product Features:

3dpsabullet New Parallel UV Lighting Source

3dpsabullet Effective Heat Dissipation System

3dpsabullet Double Linear Rails Z-axis System

3dpsabullet Supports Two Slicing Software

3dpsabullet Larger Build Volume

Additional information
Machine Size

280 x 240 x 465 mm
Build Volume

190 x 120 x 200mm
XY Resolution

59 µm
Z-axis Resolution

25 – 200 µm
Resolution/Display

3.5-inch colorful IPS touch screen 3840*2400 pixels
LED Array

405nm LED
Printing speed

10-50 mm/h
File Input

STL
Compatible software

FlashDLPrint
Connectivity

USB thumb drive
Input Power

100-240 VAC – 50/60 HZ
Package Dimensions

342 x 380 x 625 mm
Weight

15kg
Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.
Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Print LCD, Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.
Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

 

  • Model not sticking to the platform

    - Bottom exposure time is insufficient, increase the exposure time to help the resin adhere properly
    - Contact area between the model and platform is small, it is highly suggested to add a raft to increase the surface area
    - Bad Bed levelling

  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the vat is not tight enough (May cause leaks
    - Print platform or vat is not tightened or it is misaligned

  • What do I do if I had a failed print?

    - Drain and filter out the resin from the VAT to remove any excess hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?
    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model