Creality Halot One (Resin)

$259.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.007835

Recommended Uses: Jewelry, Miniature, and scale model.

In stock

Delivery: Estimated 24-48 hours to leave the warehouse, 4-7 business days in transit, and a possible 48-hour COVID-related courier delay
Shipping from Sydney Australia
SKU: C-Hlt1 Categories: ,
The self-developed optical system of the new generation adopts the light principle of reflection + refraction to make the light intensity distribution of the whole screen uniform, and each dimension of the model with consistent accuracy.

Product Features:

3dpsabullet Integral light source

3dpsabullet Strong Kernel

3dpsabullet Efficient slicing

3dpsabullet New-generation operation system

3dpsabullet OTA online upgrade

3dpsabullet Efficient cooling & filtration

3dpsabullet Precision Z-axis module

3dpsabullet Simple elegance design

3dpsabullet 5.96 Inches Monochrome LCD

Additional information
Machine size

221(L) x 221(W) x 404(H) mm

Build Volume

127(L) x 80(W) x 160(H) mm

XY-axis precision

51 µm

Z-axis Resolution

30 – 50 µm


5.96 Inches Monochrome LCD

LED Array

Integral light source

Printing speed


Compatible software

Chitubox, Prusa Slicer, Lychee Slicer


USB Flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

295(L) x 295(W) x 540(H) mm



Package Contents

3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.


12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.
3-months Limited Part Warranty for Print LCD

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Bottom exposure time is insufficient, increase the exposure time to help the resin adhere properly
    - Contact area between the model and platform is small, it is highly suggested to add a raft to increase the surface area
    - Bad Bed levelling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the vat is not tight enough (May cause leaks
    - Print platform or vat is not tightened or it is misaligned
  • What do I do if I had a failed print?

    - Drain and filter out the resin from the VAT to remove any excess hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?
    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model