Monocure 3D RESINAWAY® Cleaner Supplier Australia is a non-flammable, safe, highly advanced UV resin cleaning solution. It is chemically engineered to quickly & effectively remove any uncured UV photopolymer resin from printed parts without unwanted surface cracks, cloudiness or white residue. It is a perfect cleaner for build plates, vats, instruments & surfaces. It is safer, quicker, more effective and longer lasting than Isopropyl Alcohol (IPA).
DIRECTIONS
Use this cleaning agent as is, do not dilute with water. For best results, start with a “pre-wash” of RESINAWAY® in a separate container to remove excess resin using a soft brush to assist. Then place the object into an ultrasonic cleaning bath. Keep printed objects submerged in Monocure 3D RESINAWAY® Cleaner Supplier Australia until the uncured resin has been removed. Once clear of resin, remove the object from bath, use compressed air to remove excess liquid, otherwise pat dry with a lint-free cloth. Then post-cure the part using a recommended LED 405nm light until the surface is tack free (approx. 5 mins at 30 watts). The final process is to rinse under running tap water. For cleaning vats, build plates, instruments & surfaces, rinse/soak/wipe with RESINAWAY® then wash with fresh water.
REMEMBER: PRINT – RESINAWAY® – BLOW – POSTCURE – WASH
What is RESINAWAY?
Monocure 3D RESINAWAY is a non-flammable, safe, highly advanced UV resin cleaning solution. It is
chemically engineered to quickly & effectively remove uncured UV photopolymer resin from 3D printed parts
without unwanted surface cracks, cloudiness or white residue. It is a perfect cleaner for build plates, vats,
instruments & surfaces. It is safer, quicker, more effective and longer lasting than Isopropyl Alcohol
(IPA). RESINAWAY is considered safe for air transport, so can be shipped world wide from our friendly
resellers or direct from our website.
What are the physical properties?
Base Water miscible formula
Colour Clear liquid
Flash Point (°C) High – non-flammable formula
Viscosity 16 secs (Zahn Cup @ 20°C)
Odour Negligible
Safety Approval Non-dangerous
Shelf Life Minimum 12 months
Wash up Water
Why should I use RESINAWAY instead of IPA?
✴ Non-Flammable, safe, low odour formula
✴ Chemically engineered to remove resin quickly!
✴ No surface cracks, cloudiness or white residue
✴ Lasts much longer than IPA
✴ Less wastage due to evaporation
✴ RESINAWAY is considered safe for air transport
How should I use RESINAWAY?
Use this cleaning agent as is, do not dilute with water. For best results, start with a dump wash of
RESINAWAY in a separate container to remove excess resin using a soft brush to assist. Then
place object into an ultrasonic cleaning bath. Keep printed objects submerged in RESINAWAY until
the uncured resin has been removed. Once clear of resin, remove the object from bath, use
compressed air to remove excess liquid, otherwise pat dry with a lint-free cloth. Then post-cure the
part using a recommended LED 405nm light until the model has fully post cured. This may take 1
hour to complete the post cure process. The final process is to rinse under running tap water. For
cleaning vats, build plates, instruments & surfaces, rinse/soak/wipe with RESINAWAY then wash with
fresh water.
Important things to remember!
★ DO NOT dilute with water
★ Use with ultra sonic cleaner
★ Use air for removing excess liquid
★ Post-cure using a 405nm UV LED
★ Rinse under running water
★ Refresh once no longer effective
Having Problems? Please contact us on our website for technical support. For
safety information please download the SDS (Safety Data Sheet).
