Phrozen Sonic Mighty 4K 3D Printer

$799.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.021495

Recommended Users: Dentists and Jewelers.

In stock

Delivery: Estimated 24-48 hours to leave the warehouse, 4-7 business days in transit, and a possible 48-hour COVID-related courier delay
Shipping from Sydney Australia
SKU: Psncmghty Categories: ,
The all-new Phrozen Sonic Mighty 3D printer can print out large models in ultra-high 4K resolution, allowing you to bring your most ambitious builds to life. With an extended printing area of 9.3″ and a 22cm Z-axis, The Sonic Mighty 4K empowers makers to print larger and more ambitious builds that meet your exact designs, and its 52µm resolution brings your most ambitious creations to life with crazy detail.

Product Features: 

3dpsabullet Sonic Mighty 4K brings your most ambitious creations to life with a printing area of 9.3″ and a 22cm Z-axis

3dpsabullet 4K Resolution At 52µm, Sonic Mighty 4K prints out larger builds with extremely high-resolution

3dpsabullet Monochrome LCD Screenprints up to 4 times faster than traditional 3D printers, taking only two seconds to print one layer.

3dpsabullet Multi-Resin Compatibility performs best with Phrozen’s Aqua-Gray 4K, also compatible with 3rd party resins

3dpsabullet LCD screens work for over 2000 working hours guaranteed for all LCD screens, free 3-month warranty offered by the manufacturer

Additional information
Machine Size

280(L) x 280(W) x 440(H) mm

Build Volume

200(L) x 125(W) x 220(H) mm

XY Resolution


Z-axis Resolution

10 – 100 µm


9.3" 4K Mono LCD

LED Array

405nm ParaLED Matrix 2.0

Printing speed

80 mm/h

Compatible software



USB Flash drive

Input Power

100-240 VAC – 50/60 HZ



Package Contents

Phrozen 3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.


12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty. 2000 working hours guaranteed for all LCD screens, free 3-month warranty offered by the manufacturer

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
    - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
    - Incorrect Bed leveling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the VAT is not tight enough May cause leaks
    - Print platform or VAT is misaligned
  • What should I do if I have a failed print?

    - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?

    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
  • How Can Light-off Delay Improve My 3D Prints?

    - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
  • What Slicer Software Can I Use With My Phrozen LCD 3D Printer?

    - CHITUBOX, a third-party slicer software, is available for free and works with all Phrozen LCD 3D printers. Download here:Chitubox.