Name: Phrozen Sonic Mini 4K (Resin)
SKU: Sonic.mini.4k
Price: 699.95 AUD
Availability: OutOfStock

Product Features:

4K with 6.1” Printing Area 3840 x 2160 ultra-high-definition. Prints at 35µm with 722 PPI, the highest PPI ever, with a large printing area of 6.1”

Monochrome LCD Screenprints up to 4 times faster than traditional 3D printers, taking only two seconds to print one layer.

Super Easy to Use Just use a USB flash drive to send over your data to the printer and with a few taps, you’re good to go

Mini but mighty Compact & lightweight, easy to store, and fits in different settings for both personal or professional uses

Multi-Resin Compatibility works best with Phrozen’s Aqua-Gray 4K, also compatible with 3rd party resins

LCD screens work for over 2000 working hours guaranteed for all LCD screens, free 3-month warranty offered by the manufacturer

Machine Size	249 x 249 x 330 mm
Build Volume	135 x 75 x 130 mm
XY Resolution	35 µm
Z-axis Resolution	10 – 100 µm
Resolution/Display	3840 x 2160 pixels; Monochrome True 4K
LED Array	405nm ParaLED Matrix 2.0
Printing speed	80 mm/h
Compatible software	Chitubox
Connectivity	USB Flash drive
Input Power	100-240 VAC – 50/60 HZ
Package Dimensions	350 × 350 × 380 mm
Weight	5kg
Package Contents	Phrozen 3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.
Warranty	12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty. 2000 working hours guaranteed for all LCD screens, free 3-month warranty offered by the manufacturer

Model not sticking to the platform

- Insufficient exposure time, increasing the exposure time should help the resin adhere properly

- Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area

- Incorrect Bed leveling
Layer Separation or splitting

- Machine is not stable during printing

- FEP Film in the VAT is not tight enough May cause leaks

- Print platform or VAT is misaligned
What should I do if I have a failed print?

- Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
How long should I wash the prints?

- It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
How Can Light-off Delay Improve My 3D Prints?

- Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
What Slicer Software Can I Use With My Phrozen LCD 3D Printer?

- CHITUBOX, a third-party slicer software, is available for free and works with all Phrozen LCD 3D printers. Download here:Chitubox.

Phrozen Sonic Mini 4K (Resin)