Sold out

Phrozen Sonic Mini (Resin)

$499.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.006938

or 4 fortnightly payments of $124.99 with Afterpay More info

Buy 3D Printers and Supplies in Australia with Afterpay, Zip Pay, Bitcoin Payments and More.

Out of stock

SKU: Sonic.Mini Categories: , ,
Description
Phrozen’s Sonic Mini comes with an easy-to-use interface and has everything you need. offline printing, a 2.8in touch screen, and an LCD screen which works for over 2000 hours. Phrozen’s Sonic Mini 3D printer takes only 1 second to print a single layer and only 5 minutes to set up.

Product Features:

3dpsabullet The Phrozen mono LCD cures resin in as fast as one second! Greatly speed up your 3D printing process.

3dpsabullet Offline Printing with the 2.8″ LCD touch panel makes printing easy.

3dpsabullet Unlike conventual COB LED designs, Phrozen uses ParaLED (a parallel UV matrix backlight system) which gives the Sonic Mini excellent accuracy and print quality across the whole build plate.

3dpsabullet Phrozen uses a thermaly stable mono LCD for the Sonic Mini. The lifetime of the mono LCD is over 2000 hours! Allowing for longer times between needing maintenance.

3dpsabullet Compatible with all 3rd party LCD reins & most DLP Resins.

3dpsabullet Start printing in 5 minutes, mount the building platform, fasten the resin vat and upload the file with only 3 clicks. The Sonic mini is one of the easiest printers to start your journey in 3D printing with.

Additional information
Machine size

249 x 249 x 330 mm

Build Volume

120 x 68 x 130 mm

XY Resolution

62.5µm

Z-axis Resolution

10 – 300 µm

Resolution/Display

1920×1080 pixels / Monochrome 5.5″ HD

Printing speed

80 mm/h

Compatible software

Chitubox

Connectivity

USB flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

350 × 350 × 380 mm

Weight

5Kg

LED Array

ParaLED V2 Lite

Package Contents

Phrozen Sonic Mini 3D Printer, Metal resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.

Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the LCD*, Resin vat, Build plate, FEP Film, SD Card and ParaLED. Opening the machine without authorization voids the warranty. *The Phrozen Sonic Mini Comes with a 3 Month Warranty from Phrozen for it's LCD

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

 
  • Model not sticking to the platform

    - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
    - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
    - Incorrect Bed leveling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the VAT is not tight enough May cause leaks
    - Print platform or VAT is misaligned
  • What should I do if I have a failed print?

    - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?

    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
  • How Can Light-off Delay Improve My 3D Prints?

    - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
  • What Slicer Software Can I Use With My Phrozen LCD 3D Printer?

    - CHITUBOX, a third-party slicer software, is available for free and works with all Phrozen LCD 3D printers. Download here:Chitubox.