Sold out

Phrozen Sonic XL 4K (Resin)

$4,999.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.052774

Recommended Users: Dentists

Out of stock

Email when stock available

SKU: PsncXL4k Categories: , ,
The Sonic XL 4K 2022 allows you to print enormous quantities of precise dental models in no time. This dental 3D printer comes with the dental 3D printing slicer software, Dental Synergy Slicer, which has simplified the dental workflow with its easy-to-use interface. That’s not all. The Sonic 4K 2022 is also equipped with a heater and air purifier system to enhance your entire 3D printing experience and reduce 3D printing failures.

Product Features:

3dpsabulletAdjustable light intensity to boost print efficiency.

3dpsabulletAdd-on heater for high-quality, stable 3D prints.

3dpsabulletNo need to print from scratch after a power outage.

3dpsabulletEquipped with an air purifier to clear up resin fumes.

3dpsabulletSpecialized door buffer to increase printer lifespan.

Additional information
Machine Size

290(L) x 330(W) x 470(H) mm

Build Volume

190(L) x 120(W) x 200(H) mm

Z-axis Resolution

10 – 300 µm


3840 x 2160 pixels; Monochrome 4K

LED Array

ParaLED 3.0

Printing speed

90 mm/h

Compatible software



USB Flash Drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

380 × 380 × 450 mm



Package Contents

Phrozen Sonic XL 4K 3D Printer, Metal resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.


12 Months (for major parts) Excluded from the warranty are consumable parts such as the LCD display, Resin vat, Build plate, FEP Film, SD Card and ParaLED. Opening the machine without authorization voids the warranty.

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

  • Model not sticking to the platform

    - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
    - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
    - Incorrect Bed leveling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the VAT is not tight enough May cause leaks
    - Print platform or VAT is misaligned
  • What should I do if I have a failed print?

    - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?

    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
  • How Can Light-off Delay Improve My 3D Prints?

    - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
  • What Slicer Software Can I Use With My Phrozen LCD 3D Printer?

    - CHITUBOX, a third-party slicer software, is available for free and works with all Phrozen LCD 3D printers. Download here:Chitubox.