Back
Sold out

Phrozen Transform Fast Edition (Resin)

$3,079.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.033296

Out of stock

SKU: Transform-1 Categories: ,
Description
Meet Phrozen’s Transform 3D printer, the largest printer we have! This customizable printer consists of 13.3” & dual 5.5” changeable LCD panels that allow you to print super large models (up to 40cm in height) with convenience and ease. The fast version comes with a monochrome LCD that works to print models with extreme speed. Transform also provides a smooth printing experience using an ultra-stable 40cm Z-axis, nearly twice as long as other similar printing devices.

Product Features: 

3dpsabullet Changeable Panels 13.3″ & Dual 5.5″ LCD panels

3dpsabullet Build 13.3″ 4K display with the large build volume

3dpsabullet Ultra-Stable Z-axis: Provides a stable platform for printing

3dpsabullet Saves time by allowing you to print several prints of the same model at the same time

3dpsabullet Works best with Phrozen’s resins, also compatible with 3rd party resins

Additional information
Machine Size

380 x 350 x 610 mm

Build Volume

290 x 160 x 400 mm

XY Resolution

76µm

Z-axis Resolution

10 – 100 µm

Resolution/Display

13.3" 4K LCD or Dual 5.5” 2K LCD (Optional); 5" IPS High Resolution Touch Panel with Phrozen OS

LED Array

ParaLEDTM 2.0 Module With 405nm UV-LED

Printing speed

40mm/hr

Compatible software

Chitubox, PZSlice

Connectivity

WiFi, USB Flash drive

Input Power

100-240 VAC – 50/60 HZ

Package Dimensions

460 × 500 × 740 mm

Weight

28 kg

Package Contents

Phrozen 3D Printer, resin vat with FEP film pre-mounted, Build plate, Power supply with AU plug, Printing Kit (Gloves, Wiper/Scraper, Funnel, Etc.), Manual, NO RESIN INCLUDED.

Warranty

12 Months (for major parts) Excluded from the warranty are consumable parts such as the Resin vat, Build plate, FEP Film, SD Card, and ParaLED. Opening the machine without authorization voids the warranty.

Technical FAQs

Any 3rd Party Upgrades or Repairs done on the machine without the supervision or approval from our WhizKids - Technical Support Team will void the warranty of the printers. Please consult with us before proceeding with any upgrades or repairs.

 
  • Model not sticking to the platform

    - Insufficient exposure time, increasing the exposure time should help the resin adhere properly
    - Contact area between the model and platform may be too small, we suggest adding a raft to increase the contact area
    - Incorrect Bed leveling
  • Layer Separation or splitting

    - Machine is not stable during printing
    - FEP Film in the VAT is not tight enough May cause leaks
    - Print platform or VAT is misaligned
  • What should I do if I have a failed print?

    - Drain and filter out the resin from the VAT to remove any leftover hardened resin, if this is not filtered out, it can puncture your FEP and may cause leaks
  • How long should I wash the prints?

    - It is recommended to wash the prints for at least 2-5 mins to get rid of any excess resin on the printed model
  • How Can Light-off Delay Improve My 3D Prints?

    - Light-off delay refers to the time the build plate lifts up, waits then retracts while printing 3D models. If the light-off delay time is too high, it will take longer to complete the process. If the number is set too low, there is a higher chance of your prints failing.
  • What Slicer Software Can I Use With My Phrozen LCD 3D Printer?

    - CHITUBOX, a third-party slicer software, is available for free and works with all Phrozen LCD 3D printers. Download here:Chitubox.