Sold out

Phrozen Wax-Like 3D Printer Resin (Dark Green) – 500g

$149.95 Inc. GST

Approximate Cryptocurrency Prices:
· BTC: 0.004029

Out of stock

Email when stock available


Without a doubt one of the best performing wax casting resins on the market. We have tested casting resins before (and we have tested many). Phrozen Wax-Like Resin came out on top every time! Not only is affordable. It delivers!


  • Contents: 500g
  • XY Planar Resolution: 30 micron
  • Z Resolution (Layer Height): 10-100um
  • Cleaning: Clean with alcohol spray (or Phrozen wash). Dry with air gun or compressed air. Do not immerse model in cleaning solution for long periods
  • Suitable for: LCD 3D Printer
  • Application: Lost-wax Casting for Jewelry & Dental
  • Colour: Dark-Green
  • Low viscosity


  • Viscosity: 192 cps
  • Proportion: 1.1
  • Tg: 70 °C
  • Hardness: Shore 74D
  • Elongation: 3%
  • Break value: 8 MPa
  • I-Zod Impact:1.91 KJ/m2


  • Avoid exposure to sunlight and indoor luminescence
  • Return resin from VAT to bottle. Be sure to filter
  • Please preserve resin in closed opaque bottle to avoid both air and light exposure
  • Do not mix resins together
  • Please keep the resin away from children
  • Please do not dump resin. Please dispose of responsibly. Cure and add to general waste/plastics


  • Do not eat or swallow resin. If ingested seek medical advice immediately
  • Wear goggles to avoid eye contact with resin. If resin comes in to contact with eyes wash thoroughly and seek medical advice immediately
  • Resin may cause slight irritation to skin. Gloves should always be worn when handling resin. If allergic reaction occurs stop using immediately
  • Resin has mild odour. We strongly recommend you to use in a well ventilated room or area
  • Recommended safety equipment: gloves, mask, goggles
  • Store resin in a cool dry place. 15-35 degrees recommended